Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
-
Check the surface of the armature for scoring or bluing.
-
Check the surface of the rotor for. scoring or bluing.
-
Check the sealing surfaces for cracks, scratches and deformation.
-
Check the front housing for cracks or scoring on the sealing surfaces.
-
Check the compressor shaft for scoring.
REASSEMBLY SERVICE POINTS
Lip Seal Installation
(1) Install the special tool to the compressor crank shaft.
(2) Apply compressor oil to the sliding surface of the lip seal and the 0-ring, and insert the lip seal.
(3) Use the special tool to "insert the" lip seal.
Bearing Installation
Use a wooden stand and a" 21 mm socket to insert the bearing into the compressor
Clutch Coil Installation
When installing the clutch coil to the A/C compressor body, install so that the pin hole of the A/C compressor body and the clutch coil projection are
aligned.
