Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Snap Ring Installation
Install the snap, ring so that the tapered surface is at the outer side.
Armature Plate Installation
Align the mating mark of the crankshaft spline and the mating mark of the armature plate, and then fit them together.
Nut Installation
(1) Install the nut.
(2) Check whether or not the air gap of the clutch is within the standard value.
Standard value: 0.4-0.65 mm (.02- .03 in.)
NOTE If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.