Galant LS V6-3.0L SOHC (1999)
1.
Inspect the lower A-pillar in the area shown for lack of sealant.
2.
If there is no sealant in the area shown, clean the area with isopropyl alcohol. Then fill in the hole with clear RTV silicone sealant.
3.
Open the front door. Apply a bead of clear RTV silicone sealant along the bottom edge of both the upper and tower door hinges.
NOTE:
Fender was removed in photo for clarity. Fender removal is not required for repair procedure.
4.
If necessary, repeat Steps 1 through 3 on the other side of the vehicle.
5.
Test drive the vehicle to confirm the wind noise is eliminated.
WARRANTY INFORMATION