Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
Fig. 15 Crankshaft Sprocket "B" Installation
Fig. 16 Silent Shaft Sprocket Spacer Installation
Fig. 17 Timing Belt "B" Installation
1.
Install rear timing belt covers.
2.
Install crankshaft sprocket ``B'' as shown in Fig. 15.
3.
Install silent shaft sprocket spacer and sprocket. Install spacer as follows:
a. Apply a thin coat of engine oil to outer circumference of spacer.
b. Install spacer with chamfered end facing oil seal as shown, Fig. 16. Tighten silent shaft bolt to specifications.
4.
Align timing marks of silent shaft sprocket and crankshaft sprocket ``B,'' Fig. 17, then install timing belt ``B'' over both sprockets and ensure belt
has no slack.
5.
Adjust timing belt ``B'' tension as follows:
Fig. 18 Timing Belt "B" Tensioner Pulley Installation
