Lancer L4-2.0L (4B11) (2008)
Removal Steps 1-26 (Part 2)
Required Special Tool:
-
MB991953: Oxygen Sensor Wrench
REMOVAL SERVICE POINTS
<<A>> OXYGEN SENSOR REMOVAL
Remove the connection and clamp of oxygen sensor connector, and then use special tool MB991953 to remove the oxygen sensor.
<<B>> RIVET/FRONT FLOOR REAR PANEL HEAT PROTECTOR/FRONT FLOOR FRONT PANEL HEAT PROTECTOR REMOVAL
CAUTION: Be careful not to score the heat protector by drill.