Front Wheel Alignment
- Make
- Mitsubishi
- Model
- Lancer
- Engine
- L4-2.4L (4B12)
- Year
- 2009
- Section
- Alignment › Specifications › Front Wheel Alignment
/Page-238001.png)
Alignment: Specifications
Front Wheel Alignment
TOE-IN
Standard value:
1±2mm (0.04±0.09 inch)
STEERING ANGLE
Standard value:
40°50'±1°30' <Inner wheel>
33°50' <Outer wheel (reference)>
CAMBER, CASTER AND KINGPIN INCLINATION
Standard value:
Camber ............................................................................................................................................. -0°05'±0°30' (Left/right deviation within 30')
Caster ................................................................................................................................................. 2°40'±0°30' (Left/right deviation within 30')
Kingpin inclination ................................................................................................................................................................................. 13°30'±1°30'
NOTE: Camber and caster are preset at the factory and cannot be adjusted.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2009 Mitsubishi Lancer 2.4L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Mitsubishi power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.