Lancer L4-2.4L SOHC (2005)
YES: Go to Step 22.
NO: Go to Step 21.
STEP 21. Check the wiring harness between rear combination light (LH) connector F-14 (terminal 5) and ground.
Q: Is the wiring harness between rear combination light (LH) connector F-14 (terminal 5) and ground in good condition?
YES: Replace the rear combination light socket (LH). Verify that the taillight (LH) illuminates normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the taillights (LH) illuminate normally.
STEP 22. Check front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-10X in good condition?
YES: Go to Step 23.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the taillights (LH) illuminate normally.