Lancer L4-2.4L SOHC (2005)
STEP 23. Check the wiring harness between rear combination light (LH) connector F-14 (terminal 3) and front-ECU connector A-10X
(terminal 8).
NOTE: Also check intermediate connector C-129, junction block connectors C-210 and C-217 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate connector C-129, junction block connectors C-210 or C-217 are damaged, repair or replace the damaged
component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear combination light (LH) connector F-14 (terminal 3) and front-ECU connector A-10X (terminal 8) in good
condition?
YES: Replace the rear combination light socket (LH). Verify that the taillights (LH) illuminate normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the taillights (LH) illuminate normally.
