Lancer L4-2.4L SOHC (2005)
YES: Go to Step 3.
NO: Replace the power window main switch. When the power window sub-switch is operated, the power windows should open or close normally.
STEP 3. Check the power window lock switch.
Q: Is the power window lock switch at the "UNLOCK" position?
YES: Go to Step 4.
NO: Operate the power window lock switch to the "UNLOCK" position? When the power window sub-switch is operated, the power windows should
open or close normally.
STEP 4. Check which door window is not opened or closed
Q: Which door window is opened or closed?
Passenger's side : Go to Step 5.
Rear passenger (LH) : Go to Step 14.
Rear passenger (RH) : Go to Step 23.
STEP 5. Check power window sub-switch (front: RH) connector E-14 and power window motor (front: RH) connector E-11 for loose, corroded
or damaged terminals, or terminals pushed back in the connector.
Q: Are power window sub-switch (front: RH) connector E-14 and power window motor (front: RH) connector E-11 in good condition?
YES: Go to Step 6.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. When the power window sub-switch (front: RH) is
operated, the front power window (RH) should open or close normally.
STEP 6. Check the power window sub-switch (front: RH) for continuity.
1. Remove the power window sub-switch (front: RH). Refer to Door-Door Trim and Waterproof Film.