mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2231 > < Initial Inspection and Diagnostic Overview|Page 2229
Page 107
background image

2. Check continuity when the power window sub-switch (front: RH) is operated to "UP" or "DOWN" position.

Q: Is the power window sub-switch (front: RH) normal?

YES: Go to Step 7.

NO: Replace the power window sub-switch (front: RH). When the power window sub-switch (front: RH) is operated, the front power window
(RH) should open or close normally.

STEP 7. Check the power window motor (front: RH).

1. Remove the front power regulator assembly (RH). Refer to Door-Door Glass and Regulator.

2. Connect a battery to the motor terminal, and check that the motor runs freely.

Q: Is the power window motor (front: RH) normal?

YES: Go to Step 8.

Initial Inspection and Diagnostic Overview|Page 2231 > < Initial Inspection and Diagnostic Overview|Page 2229