mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2247 > < Initial Inspection and Diagnostic Overview|Page 2245
Page 123
background image

2. Measure the resistance value between terminal 5 and ground, and also between terminal 8 and ground.

-

The resistance should equal 2 ohms or less.

Q: Is the measured resistance 2 ohms or less?

YES: Go to Step 31.

NO: Go to Step 30.

Initial Inspection and Diagnostic Overview|Page 2247 > < Initial Inspection and Diagnostic Overview|Page 2245