Lancer L4-2.4L SOHC (2005)
STEP 30. Check the wiring harness between power window main switch connector E-05 (terminal 4 and 6) and power window sub-switch
(rear: RH) connector E-17 (terminal 8 and 5).
NOTE: Also check intermediate connectors C-17, C-113 and D-04 for loose, corroded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connectors C-17, C-113 or D-04 are damaged, repair or replace the damaged component(s) as described in Harness Connector
Inspection.
Q: Is the wiring harness between power window main switch connector E-05 (terminal 4 and 6) and rear power sub-switch (RH) connector
E-17(terminal 8 and 5) in good condition?
YES: Replace the power window main switch. When the power window sub-switch (rear: RH) is operated, the rear power window (RH) should open
or close normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. When the power window sub-switch (rear: RH) is operated, the rear power window (RH) should
open or close normally.
