Lancer L4-2.4L SOHC (2005)
STEP 31. Check the wiring harness between power window sub-switch (rear: RH) connector E-17 (terminal 6 and 7) and power window motor
(rear: RH) connector E-16 (terminal 2 and 1).
Q: Is the wiring harness between rear power window main switch (RH) connector E-17 (terminal 6 and 7) and power window motor (rear: RH)
connector E-16 (terminal 2 and 1) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. When the power window sub-switch (rear: RH) is operated, the rear power window (RH) should
open or close normally.
Inspection Procedure D-5
Power Windows: Front or rear passenger's power windows do no work at all by operating the power window main switch.
Power Window (front: RH) Circuit
