Lancer L4-2.4L SOHC (2005)
Fog Light Circuit Part 2
TECHNICAL DESCRIPTION (COMMENT)
If one of the fog lights does not illuminate, the fog light relay or the fog light bulb may be defective. If the fog light indicator light does not illuminate,
the combination meter may be defective.
TROUBLESHOOTING HINTS
-
The fog light bulb may be defective.
-
The combination meter may be defective.
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector.
DIAGNOSIS
Required Special Tool:
-
MB991223: Harness Set
STEP 1. Verify the fog lights and the fog light indicator light operation.
Q: Which of the fog lights and the fog light indicator light does not illuminate normally?
Only the fog light (LH) does not illuminate : Go to Step 2.
Only the fog light (RH) does not illuminate : Go to Step 8.
Only the fog light indicator light does not illuminate : Go to Step 14.
Both the fog lights and the fog light indicator light do not illuminate : Refer to Inspection procedure J-1 "Fog lights do not illuminate when the
fog light switch is turned on".
