mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2407 > < Initial Inspection and Diagnostic Overview|Page 2405
Page 283
background image

STEP 18. Check fog light relay connector A-04X and combination meter connector C-01 for loose, corroded or damaged terminals, or
terminals pushed back in the connector
.

Q: Are fog light relay connector A-04X and combination meter connector C-01 in good condition?

YES: Go to Step 19.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog light indicator light illuminates
normally.

Initial Inspection and Diagnostic Overview|Page 2407 > < Initial Inspection and Diagnostic Overview|Page 2405