mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1943 > < Initial Inspection and Diagnostic Overview|Page 1941
Page 110
background image

YES: Go to Step 22.

NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. When the rear power window sub switch (REAR: LH) is
operated, the rear power window (LH) should open or close normally.

STEP 22.

Check the wiring harness between power window relay connector C-224 (terminal 4) and power window sub switch (REAR: LH)
connector E-08 (terminal 5).

Initial Inspection and Diagnostic Overview|Page 1943 > < Initial Inspection and Diagnostic Overview|Page 1941