Lancer Evolution L4-2.0L DOHC Turbo (2003)
![background image](/mitsubishi/lancer_evolution/l4-2.0l_dohc_turbo/Page-501001.png)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
FUEL LEVEL SENSOR REPLACEMENT
1. Remove the rear seat cushion assembly. (Refer to Rear Seat Assembly).
2. Remove the service hole cover.
3. Disconnect the harness connector fuel high-pressure hose suction hose and fuel return hose.
CAUTION: When withdrawing the fuel pump module or fuel pipe and gauge assembly from the fuel tank, be careful not damage the sensor unit
and the float.
4. Unscrew the mounting nuts to remove the fuel pump module or fuel pipe and gauge assembly.
NOTE: Check the fuel level sensor (Refer to Combination Meter Assembly and Vehicle Speed Sensor - On-vehicle Service). If defective replace
it.