Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Install the adjuster assembly so that the shoe adjusting bolt is positioned at the rear of the vehicle for the left side, and at the front of the vehicle for the
right side.
[D] SHOE-TO-ANCHOR SPRING INSTALLATION
The shoe-to-anchor springs are not interchangeable because their spring loads are different. The one with blue paint must be installed to the vehicle
front, and the other with yellow paint to the vehicle rear.
Inspection
PARKING BRAKE LINING AND DRUM
INSPECTION
BRAKE LINING THICKNESS CHECK