Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-603195.png)
4. Measure the voltage between joint connector (CAN1) terminal 21 and body ground.
OK: 4.7 V or less
Q: Do all the voltages measure 4.7 V or less?
YES : Go to Step 18.
NO : Go to Step 51.
STEP 18. Check the wiring harness between joint connector (CAN1) C-105 and occupant classification-ECU connector D-39-2 for a short to
power supply. Measure the voltage at joint connector (CAN1) C-105.
1. Disconnect joint connector (CAN1), and measure the voltage at the wiring harness side of joint connector (CAN1).
2. Turn the ignition switch to the ON position.
3. Measure the voltage between joint connector (CAN1) terminal 11 and body ground.
OK: 4.7 V or less
4. Measure the voltage between joint connector (CAN1) terminal 24 and body ground.
OK: 4.7 V or less
Q: Do all the voltages measure 4.7 V or less?
YES (vehicles without hands free system) : Go to Step 20.
YES (vehicles with hands free system) : Go to Step 19.
