mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag|Testing and Inspection|Page 5257 > < Clockspring Assembly / Spiral Cable, Air Bag|Testing and Inspection|Page 5255
Page 3
background image

-

MB992006: Extra Fine Probe

REMOVAL SERVICE POINTS

[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION

DANGER:  Wait at least 60 seconds after disconnecting the battery cable before doing any further work.

WARNING:  Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.

Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and airbag(s) deployment.

[[B]] COVER REMOVAL

Insert Special tool MB990784 into the notch shown in the figure,and remove the cover.

[[C]] DRIVER'S AIR BAG MODULE CONNECTOR REMOVAL

Clockspring Assembly / Spiral Cable, Air Bag|Testing and Inspection|Page 5257 > < Clockspring Assembly / Spiral Cable, Air Bag|Testing and Inspection|Page 5255