Lancer Sportback L4-2.4L (4B12) (2010)
/Page-572050.png)
Q: Do all the voltages measure 4.7 volts or less?
YES [Except RALLIART] : Go to Step 5.
YES [RALLIART] : Go to Step 7.
NO : Go to Step 14.
STEP 5. Check the wiring harness between joint connector (CAN3) C-124 and TCM connector C-41 for a short to power supply. Measure the
voltage at joint connector (CAN3) C-124.
1. Disconnect joint connector (CAN3), and measure the voltage at the wiring harness side of joint connector (CAN3).
2. Turn the ignition switch to the ON position.
3. Measure the voltage between joint connector (CAN3) terminal 7 and body ground.
OK: 4.7 volts or less
4. Measure the voltage between joint connector (CAN3) terminal 20 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES : Go to Step 6.
NO : Go to Step 15.
STEP 6. Check the wiring harness between joint connector (CAN3) C-124 and ECM connector B-109 [Except RALLIART] for a short to
power supply. Measure the voltage at joint connector (CAN3) C-124.
1. Disconnect joint connector (CAN3), and measure the voltage at the wiring harness side of joint connector (CAN3).
2. Turn the ignition switch to the ON position.