Montero Endeavor 4WD V6-3.5L SOHC (2000)
Side Air Bag Module: Service and Repair
After deployment, the air bag module should be disposed of in the same manner as any other scrap parts, observe the following precautions during air
bag disposal:
1. The inflator will be quite hot immediately following deployment, so wait at least 30 minutes to allow it to cool before attempting to handle it.
2. Do not put water or oil on the air bag after deployment.
3. There may be material on the deployed air bag module, material that could irritate the eyes and/or skin. Wear gloves and safety glasses when
handling a deployed air bag module.
CAUTION: If despite these precautions, the material does, get into the eyes or on the skin, immediately rinse the affected area with a large
amount of clean water. If any irritation develops, seek medical attention.
4. Tightly seal the air bag module in a strong vinyl bag for disposal.
5. Be sure to always wash your hands after completing this operation.