Montero Sport 2WD V6-3.0L SOHC (1997)
-
Do not allow engine oil or other grease to adhere to the O-ring
-
Insert the O-ring to the water pipe, and coat the outer portion of the O-ring with water or engine coolant.
-
To reuse the water hose, align the mating marks that were made during removal, and then install the hose clamp.
-
Bend over the tabs to secure the gasket to the water passage assembly.
-
Insert each hose as far as the projection of the water outlet fitting.
-
Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
