mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Replacement|Page 4914 > < Mechanical Specifications|Page 4911
Page 1
background image

Steering Gear: Service and Repair
Replacement

REMOVAL 

WARNING:  Supplemental Restraint System (SRS).

-

Before removal of steering gear box, center front wheels and remove ignition key. Failure to do so may damage SRS clock spring and
render SRS system inoperative, risking serious driver injury.
 

 

1. Drain power steering fluid.
2. Follow removal steps outlined in illustration.

NOTE:  Removal service points as follows:

a. Pitman arm and relay rod disconnection (3).

Required Special Tool: MB990635 or MB991113: Steering Linkage Puller or equivalents.

Replacement|Page 4914 > < Mechanical Specifications|Page 4911