mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Overdrive Clutch|Page 3243 > < Overdrive Clutch|Page 3241
Page 4
background image

C. Snap ring installation. (7)

Required Special Tools or equivalents:

MD998921: Spring Compressor.
MD998924: Spring Compressor Retainer.

CAUTION:  Be sure the end gap of the snap ring is not aligned with the stopper of the spring seat.

D. Clutch flange installation. (4)

1. install the clutch flange to the overdrive direct clutch drum so that the flange's convex side faces up as illustrated.

Overdrive Clutch|Page 3243 > < Overdrive Clutch|Page 3241