Montero Sport 2WD V6-3.0L SOHC (1997)
MD998921: Spring Compressor.
INSPECTION
Forward Clutch Disc
1. Using a micrometer, measure the thickness of the clutch disc.
Limit: 1.84 mm (0.072 inch)
NOTE: The thickness must be measured at two or three points. Compare the average value with the limit.
Return Spring Assembly
1. Measure the free length of the spring including the spring seat.
Standard value: Approximately 11.55 mm (0.455 inch)
Forward Clutch Piston
1. Check that the check ball is free by shaking the piston.
2. Check that the valve does not leak by applying low-pressure compressed air.
Forward Clutch Piston Stroke
1. Install the forward clutch to the overdrive support assembly.
2. Using a dial gauge, measure the piston stroke by applying compressed air (400 - 800 kPa, 57 - 113 psi) into the oil hole of the overdrive
support as shown and then releasing the air.
