Montero Sport LTD 2WD V6-3.5L SOHC (2000)
STEP 3. Check the harness wires between the ignition switch (IG1) and junction block connector D-11
If any harness wires between the ignition switch (IG1) and junction block connector D-11 are damaged, repair them. Then go to Step 4.
NOTE: Check the intermediate connectors C-02, C-04, D-06, D-08, D-13, and then their wiring harness. If the intermediate connectors C-02, C-04,
D-06, D-08, D-13 are damaged, repair or replace it. Refer to vehicle level Testing and Inspection. Then go to Step 4.
STEP 4. Check symptoms
Confirm that the system operates normally.