Montero SR 4WD V6-3.5L SOHC (1997)
![background image](/mitsubishi/montero_sr_4wd/v6-3.5l_sohc/Page-1319010.png)
NOTE:
-
If the one-way clutch turns or locks in both directions, replace the one-way clutch.
-
If the one-way clutch turns clockwise while it doesn't counterclockwise, the one-way clutch may have been assembled in the reverse
direction.
I.
Seal ring installation. (2)
1. Apply ATF to the seal ring and attach it to the output shaft.
CAUTION:
-
Do not bend the claw of the seal ring.
-
Do not open the seal ring wider than necessary.
Second Brake
DISASSEMBLY
Follow disassembly steps outlined in illustration.
NOTE: Disassembly service points as follows: