Montero XLS 4WD V6-3.5L SOHC (2001)
PARTS INFORMATION
WARRANTY INFORMATION
Normal warranty procedures apply for paint labor operation code 421044.
For applying protective film, use addition time allowance code 421044P1 for 0.2 hrs.
Technical Service Bulletin # 01-42A-006
Date: 010601
Door Sill - Paint Chipping
No.: TSB-01-42A-006
DATE: June, 2001
MODEL: 2001 Montero
SUBJECT:
DOOR SILL PAINT CHIPPING OR PEELING
PURPOSE
Repeated driver or passenger foot scraping on the front or rear door sill may cause paint chipping or peeling. After repairing the paint, apply a special
protective film (listed in the PARTS INFORMATION section of this bulletin) to the door sill to prevent future paint damage.
Vehicles produced after 10/7/00 are equipped with factory-applied protective film on the door sills.
AFFECTED VEHICLES
2001 Montero models produced before 10/7/00 VIN 1J024427)
PROCEDURE
1.
After repairing the door sill paint, allow the paint to air dry for 24 hours. Or, if the paint has been baked after repair, allow to air dry for 3 hours
after baking.
2.
Prepare a solution of 50/50 isopropyl alcohol and water in a spray bottle. Generously spray the solution onto the door sill and onto the adhesive
side of the protective film.
