mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2218 > < Initial Inspection and Diagnostic Overview|Page 2216
Page 188
background image

YES: There is no action to be taken.
NO: Repair them. The rear wiper motor auto-stop signal should be able to be checked and the rear wiper should stop at the predetermined park
position.

STEP 6. Check rear wiper motor connector I-07 and ETACS-ECU connector D-222 for damage.

Q: Are rear wiper motor connector I-07 and ETACS-ECU connector D-222 in good condition?

YES: Go to Step 7.
NO: Repair or replace them. Refer to Harness Connector Inspection. The rear wiper motor auto-stop signal should be able to be checked and the rear
wiper should stop at the predetermined park position.

Initial Inspection and Diagnostic Overview|Page 2218 > < Initial Inspection and Diagnostic Overview|Page 2216