Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 30. Check the back door lock actuator switch connector I-05 and ETACS-ECU connector D-223 for damage.
Q: Are back door lock actuator switch connector I-05 and ETACS-ECU connector D-223 in good condition?
YES: Go to Step 31.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the back door lock actuator switch should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 31. Check the harness wires between back door lock actuator switch connector I-05 and ETACS-ECU connector D-223.