Outlander 2WD V6-3.0L (6B31) (2007)
this TSB.
AFFECTED VEHICLES
2007-09 Outlander
PROCEDURE
Replace the damaged splash shield following instructions in Group 42A - SPLASH SHIELD in the service manual.
NOTE:
Pay attention to fastener locations. There are 4 (four) different types of push-pin retaining clips and one bolt (10 mm head) used for the splash shield.
Fasteners MUST be installed in their original location.
Torqued the bolt as indicated when installing the new splash shield.
PARTS INFORMATION
Use the Genuine Mitsubishi Parts listed.
WARRANTY INFORMATION
This bulletin is supplied as technical information only and is not an authorization to repair. If an affected vehicle is observed with the described condition
diagnose the condition repair as described in this bulletin and submit a normal warranty claim using the following information.
SPLASH SHIELD REPLACEMENT
Nature Code: 56T
Cause Code: 160
Labor Operation No.: 42202595
Time Allowance: 0.5 hr.
Warranty Coverage: Basic coverage.