Outlander 2WD V6-3.0L (6B31) (2007)
2. Measure the resistance between joint connector (CAN2) terminal 4 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN2) terminal 15 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES: Go to Step 2.
NO: Go to Step 7.
STEP 2. Check the wiring harness between joint connector (CAN2) C-04 and AWD-ECU connector C-128 for a short to ground. Measure the
resistance at joint connector (CAN2) C-04.
1. Disconnect joint connector (CAN2), and measure the resistance at the wiring harness side of joint connector (CAN2).
2. Measure the resistance between joint connector (CAN2) terminal 5 and body ground.
OK: 1 kilo ohm or more