Outlander 2WD V6-3.0L (6B31) (2007)
/Page-677022.png)
3. Measure the resistance between joint connector (CAN2) terminal 16 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES: Go to Step 3.
NO: Go to Step 8.
STEP 3. Check the wiring harness between joint connector (CAN2) C-04 and ETACS-ECU connector C-301 for a short to ground. Measure the
resistance at joint connector (CAN2) C-04.
1. Disconnect joint connector (CAN2), and measure the resistance at the wiring harness side of joint connector (CAN2).
2. Measure the resistance between joint connector (CAN2) terminal 6 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN2) terminal 19 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES: Go to Step 4.
NO: Go to Step 9.
