Outlander 2WD V6-3.0L (6B31) (2007)
/Page-677097.png)
YES(vehicles without MMCS): Go to Step 20.
YES(vehicles with MMCS): Go to Step 21.
NO: Go to Step 30.
Part 2
STEP 20. Check the wiring harness between joint connector (CAN1) C-103 and radio and CD player or CD changer connector C-16 for a short
to power supply. Measure the voltage at joint connector (CAN1) C-103.
CAUTION: A digital multimeter should be used.
CAUTION: The test wiring harness should be used.
1. Disconnect joint connector (CAN1), and measure the voltage at the wiring harness side of joint connector (CAN1).
2. Turn the ignition switch to the ON position.
3. Measure the voltage between joint connector (CAN1) terminal 10 and body ground.
OK: 4.7 volts or less
4. Measure the voltage between joint connector (CAN1) terminal 23 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES(vehicles without satellite radio): Go to Step 23.
YES(vehicles with satellite radio): Go to Step 22.
NO: Go to Step 31.
STEP 21. Check the wiring harness between joint connector (CAN1) C-103 and CAN box unit connector C-13 for a short to power supply.
Measure the voltage at joint connector (CAN1) C-103.
CAUTION: A digital multimeter should be used.
CAUTION: The test wiring harness should be used.
