Outlander AWD L4-2.4L (4B12) (2010)
Removal Steps 1-19
Required Special Tools:
^
MB991928: Engine Hanger
^
MB992090: Retainer Holder Attachment
^
MB991895: Engine Hanger
^
MB992085: Valve Stem Seal Pliers
^
MD998772: Valve Spring Compressor
^
MD998737: Valve Stem Seal Installer
^
MB992089: Retainer Holder C
REMOVAL SERVICE POINTS
[A] FRONT CAMSHAFT BEARING CAP ASSEMBLY REMOVAL
1. Temporarily install the engine oil pan which was removed at the valve timing chain removal.
CAUTION
When supporting the engine and transaxle assembly with a garage jack, be careful not to deform the engine oil pan.
2. Place a garage jack against the engine oil pan with a piece of wood in between to support the engine and transaxle assembly.