Outlander AWD L4-2.4L (4B12) (2010)
3. Remove special tool engine hanger (MB991928 or MB991895) which was installed for supporting the engine and transaxle assembly when the
valve timing chain was removed.
CAUTION
Be careful not to drop the camshaft bearing.
4. Loosen the mounting bolts of front camshaft bearing cap in the order of number shown in the figure, and remove the front camshaft bearing cap
assembly.
[B] CAMSHAFT BEARING OIL FEEDING CAP/CAMSHAFT BEARING CAP/CAMSHAFT BEARING THRUST CAP REMOVAL
CAUTION
When the camshaft bearing cap mounting bolts are loosened at once, the mounting bolts jump out by the spring force and the threads are
damaged. Always loosen the mounting bolts in four or five steps.