Outlander AWD L4-2.4L (4B12) (2010)
YES : Go to Step 6.
NO : Replace the bulb of the ignition key cylinder illumination light.
STEP 6. Check the wiring harness between key reminder switch connector C-211 (terminal No. 7) and body ground.
-
Check the ground line for open circuit.
Q: Is the check result normal?
YES : Go to Step 7.
NO : Repair the wiring harness between key reminder switch connector C-211 and body ground.
STEP 7. Retest the system.
Q: Does the ignition key cylinder illumination light illuminate/extinguish in good condition?
YES : The trouble can be an intermittent malfunction
NO : Replace the ETACS-ECU.
Inspection Procedure 2
Inspection Procedure 2: Defective Power Supply System Of The Ignition Switch