Outlander AWD L4-2.4L SOHC (2003)
Q: Are ETACS-ECU connectors C-220 and C-217, and driver's door lock actuator connector E-10 in good condition?
YES: Go to Step 6.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair or replace the damaged components). Refer to Harness Connector Inspection. Verify that the central door locking system works
normally.
STEP 6. Check the wiring harness from ETACS-ECU connectors C-220 (terminal 22) and C-217 (terminal 12) to driver's door lock actuator
connector E-10 (terminals 4 and 6).
NOTE: Also check intermediate connector C-118 and junction block connector C-205 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-118 or junction block connector C-205 is damaged, repair or replace the damaged
components) as described in Harness Connector Inspection.