Outlander AWD L4-2.4L SOHC (2003)
Q: Is the wiring harness from ETACS-ECU connectors C-220 (terminal 22) and C-217 (terminal 12) to driver's door lock actuator connector E-10
(terminals 4 and 6) in good condition?
YES: Replace the ETACS-ECU. Verify that the central door locking system works normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair or replace the damaged components). Verify that the central door locking system works normally.
Inspection Procedure C-2
Central Door Locking System: Some doors do not lock or unlock.