Raider 4WD V6-3.7L SOHC (2007)
Vehicle Lifting: Service and Repair
HOISTING
STANDARD PROCEDURE
HOISTING RECOMMENDATIONS
WARNING: The hoisting and jack lifting points provided are for a complete vehicle. When a chassis or drivetrain component is removed
from a vehicle, the center of gravity is altered making some hoisting conditions unstable. Properly support or secure vehicle to hoisting device
when these conditions exist.
FLOOR JACK
CAUTION: Do not attempt to lift a vehicle with a floor jack positioned under:
^
An axle tube.
^
Aluminum differential.
^
A body side sill.
^
A steering linkage component.
^
A drive shaft.
^
The engine or transmission oil pan.
^
The fuel tank.
^
A front suspension arm.
When properly positioned, a floor jack can be used to lift a Raider. Support the vehicle in the raised position with jack stands at the front and rear ends
of the frame rails.
HOIST
A vehicle can be lifted with:
^
A single-post, frame-contact hoist.
^
A twin-post, chassis hoist.
^
A ramp-type, drive-on hoist.
NOTE: When a frame-contact type hoist is used, verify that the lifting pads are positioned properly.