mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Electronic Brake Control Module > < Vacuum Brake Booster|Service and Repair
Page 1
background image

ABS Main Relay: Service and Repair

    On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

1.

Disconnect ECU electrical connector.

2.

Remove four attaching screws (located under the high floor side panel on the right side of luggage compartment), then remove control unit.

3.

Reverse procedure to install.

Electronic Brake Control Module > < Vacuum Brake Booster|Service and Repair