CL - Clutch: CLUTCH UNIT - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › CL - Clutch: CLUTCH UNIT - Nissan 200SX S12 Workshop Manual
CL - Clutch: CLUTCH UNIT
h
CLUTCH UNIT
i -me— Inspecting Clutch Disc —————_Inspecting Clutch Cover__
£ tuck clutch dise for runout, ete.
© Check height and unevenness of diaphragm spring after setting Tool.
Diaphragm spring height “A:
Renout tie of facing ‘ 33 - 36 mm (1,30 - 1.38 i {tt 107.8 mm {4,23 i) from the hub oentarl : Voom (0.099 in} ‘Unevenness limit: ; Burn or i
0.6 mm (0,020 in} dlucotoretion i \ ‘Maximum bsokleeh of spline i! ©; iitavt ede of inl: ll ‘akin (.38 QALMALLY
scLi88 scuiea
Tool.
(© Mare the depth of rivet head ‘Wear limit;
0.3 em {0,012 in) scu207
©
Check thrust rings for wear or damage by
shaking cover assembly up and down to listen
for chattering noise, or lightly hammering on rivets for a slightly cracked noise,
CL-7
Parts & tools for this job For Nissan 200SX
- PARTClutch kitSearch: Nissan 200SX clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Nissan 200SX manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.