CL - Clutch: HYDRAULIC CLUTCH CONTROL - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › CL - Clutch: HYDRAULIC CLUTCH CONTROL - Nissan 200SX S12 Workshop Manual
CL - Clutch: HYDRAULIC CLUTCH CONTROL
HYDRAULIC CLUTCH CONTROL
Bleeding Procedure.
Adjusting Clutch Pedal Puth rod Barejully monitor fluid level at master cylinder Pad stopper
F during bleeding operation.
‘or clutch switch F eled sir according to the following procedure.
L clutch damper ~ Operating cylinder
Top up reservoir with recommended brake
Look net [Py ePedalstonper fia, 78-22 Connect a transparent vinyl tube to air bieeder (18 - 12-1 vale. ‘sciurch itch 12-18 (2-15, erty
Pad
Floor cerpat
New xgen, teh BF): sciy81
Pedal height ““H" 189 - 199 mm {7,44 - 7.83 in) Podal free play “A’” 1+ 3.0 mm (0,039 - 0.118 in)
1, Adjust pedal height with pedal stopper or clutch switch.
2. Adjust pedal free play with push rod.
EcLoop
Fully depress clutch pedal several times.
With clutch pedal depressed, open bleeder valve .to relesse air, J
{f. Close bleeder valve.
& Repeat steps 3 through 5 above until clear
brake fluid comes out of air bleeder valve. | be ie
CL-3 t
Parts & tools for this job For Nissan 200SX
- PARTClutch kitSearch: Nissan 200SX clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Nissan 200SX manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.