350Z V6-3.5L (VQ35) (2003)
B.
If the valve stems are silver-colored metal-type (see Figure 2) use a non-permanent marker to mark the stem Left, or Right. Then follow the
CAUTIONS before going to Step 4.
CAUTION:
First read the "tips", below, before trying to remove a tire from the wheel.
Tire Removal Tips:
^
When removing a tire with a transponder installed, before breaking the tire bead from the rim, first remove the nut from the valve stem.
^
Then, push the valve stem/air pressure transponder into the inside of the tire.
^
Failure to do this will result in transponder damage.
Positioning TPMS Transponder When Remounting Tires:
^
When remounting tires, make sure the TPMS Transponder is positioned as close to the wheel surface as possible (see Figure 3).
^
To avoid having to perform TPMS Initialization, make sure the Transponder stays in its original position on the car.
For Example:
^
The right-front Transponder remains with the right-front wheel.
^
The left-front Transponder remains with the left-front wheel.
^
Refer to the mark you made in step 3B for correct Transponder placement.
NOTE: