Overhaul: Special tools (page 4 of 7)

Mount the engine on the DESVIL stand, fig. I, after having first removed the rear water hose.

Remove the components parts as shown in fig. II and III.

Remove, as shown in fig. IV

• the 5 nuts that secure the rocker shaft,
• the 10 cylinder head bolts,
• the rocker shaft assembly,
• the push rods (mark their respective positions as they are removed).

Free the cylinder head, fit V, using levers 0.0149 to tilt it.

Retain the liners fig. VI, using clamps 8.0132 A1Z.