Neon L4-2.0L DOHC (1996)
1. Locate paint dot on backside of trim welt.
2. Position trim welt to vehicle with paint dot in the appropriate position.
3. Press trim welt onto door opening flange starting at the paint dot position.
4. Install door sill trim panel
Door Sill Trim
Door Sill Trim
REMOVAL
1. Open door to gain access to sill trim.
2. Disengage clips holding sill trim to door sill and door opening flange.
3. Separate door sill trim from vehicle.
INSTALLATION
1. Position door sill trim on door sill.
2. Align locating pins on backside of trim panel to holes in door sill.
3. Engage clips on trim panel into slots in door sill.
4. Engage clips on trim panel onto door opening flange.
5. Press downward on trim panel to fully engage all clips.
Lower Quarter Trim-4 Door
Lower Quarter Trim
REMOVAL
1. Remove upper quarter trim panel.
2. Remove rear seat cushion and back.
3. Disengage clips holding trim to lower quarter panel.
4. Remove seat belt from slot in trim panel.
5. Separate lower quarter trim from vehicle.
INSTALLATION
1. Position lower quarter trim panel to vehicle.
2. Install seat belt to slot in trim panel.