Neon L4-2.0L DOHC (1996)
3. Align locating pins on backside of trim panel to mating holes in inner quarter panel.
4. Press clips on trim panel into slots in inner quarter panel.
5. Install rear seat back and cushion.
6. Install upper quarter trim panel.
Parcel Shelf Trim
Parcel Shelf Trim
1. Remove upper quarter trim from one side of vehicle.
2. Remove rear seat cushion and back.
3. Remove bolts holding rear seat shoulder belt lower anchors to floor pan.
4. Disengage seat belt bezel from parcel shelf.
5. Separate parcel shelf trim from vehicle.
6. Reverse the preceding operation for installation.
Quarter Trim Panel-2 Door
Quarter Trim Panel
REMOVAL
1. Remove rear seat cushion and back.
2. Slide lower seat belt anchor cover up the webbing to expose the belt.
3. Remove bolt holding lower seat belt anchor to floor.
4. Separate seat belt from floor.
5. Remove screw holding coat hook to top of quarter trim panel.
6. Disengage hidden clips holding quarter trim panel to inner quarter panel.
7. Separate trim from quarter panel.
8. Feed seat belt webbing through access bole in trim panel.
9. Separate quarter trim panel from vehicle.
INSTALLATION
1. Feed seat belt webbing through access hole in trim panel.
2. Position trim panel near inner quarter panel.
3. Align locating pins on backside of trim panel to mating holes in inner quarter panel.
