Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Disc Brake System > Brake Pad > Component Information > Service and Repair > Removal and Installation > Page 2547

Page 3
background image

Fig 10  Caliper And Outboard Shoe Retainer Flange

Fig. 7  Bending Outboard Pad Retaining Flange

Fig 12  Attaching Shoe To Caliper Fingers With C-clamp

NOTE:  No free play between brake shoe flanges and caliper fingers should exist (which might cause brake shoe rattle).
-

If free play is evident by vertical shoe movement after installation, remove shoe from caliper and bend flanges to create slight interference fit
to eliminate all vertical free play when shoe is installed. 

-

Install shoe after above modification, if necessary, by snapping shoe into place with fingers or with light "C" clamp, protect new lining from

Brakes and Traction Control > Disc Brake System > Brake Pad > Component Information > Service and Repair > Removal and Installation > Page 2547

[PREV PAGE] [NEXT PAGE]