Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Drum Brake System > Brake Shoe > Component Information > Service and Repair > Brake Shoe Removal and Installation > Page 2593

Page 2
background image

6. Disengage primary and secondary shoes and remove adjusting star wheel assembly from shoes.

7. Remove brake shoe retainers, springs and nails -- using Tool C-4070 or equivalent,, and remove from support.
8. Remove parking brake lever from secondary shoes. Remove shoes.
9. Disengage parking brake lever from parking brake cable.

Installation

For additional information see Notes, Warnings, and Hints. 

1. Lubricate the six shoe tab contact pads on support plate with a thin film of MOPAR Multi-Purpose Lubricant, Part number 4318063 or equivalent.
2. Engage parking brake lever with cable. Install parking brake lever into rectangular hole of secondary brake shoe.
3. Slide secondary shoe against support plate, at the same time engage shoe web with push rod and against anchor.

Brakes and Traction Control > Drum Brake System > Brake Shoe > Component Information > Service and Repair > Brake Shoe Removal and Installation > Page 2593

[PREV PAGE] [NEXT PAGE]